AX60+
If you need a simple, ready to install and cost-effective gas safety monitor – we’ve got you covered. The Ax60+ is easy to install and already programmed for your local regulations. Simple. Reliable. Easy to Install. Those words are frequently mentioned by facility managers, safety engineers, and key decision makers when talking about the Analox Ax60+ Multi-Gas Analyzer.
Key Features
- Central unit with a hi-res digital display
- Choice of 1 -4 sensors
- Choose the number of alarm units (up to 4 per sensor, system maximum 8 alarm units)
- Choose any combinations of gases – Carbon dioxide (CO2) or oxygen (O2)
- 2 In-built relays
- Audible & Visual alarms
- Time weighted average (TWA) alarm
- Quick connect or hard wired installation options
- 5 year electronics warranty
- 5 year carbon dioxide (CO2) sensor warranty
- Graded 5 year oxygen (O2) sensor warranty
CO2 monitoring & O2 monitoring with the AX60+
Each Ax60+ unit is scalable to meet the specific needs of the customer. Up to four analyzing sensors can be networked with the central monitoring station. The units can monitor for O2, CO2 or a combination of both gasses providing the flexibility most establishments need. Each sensor can handle up to four alarm units which respond with audible and visual indicators when the alarm setting is triggered.
- CARBON DIOXIDE SENSOR UNIT
- Monitoring for CO2 (carbon dioxide) contamination in a workspace is as vital as monitoring simple O2 levels and often for the same reasons. The Analox Ax60+ uses state-of-the-art Nondispersive Infrared (NDIR) technology to monitor for CO2. This process uses infrared light to determine the intensity and level of CO2 in a given workspace.
- OXYGEN SENSOR UNIT
-
The O2 monitoring system incorporates a lead-free electrochemical sensor that provides protection from potential O2 depletion caused by foreign gas elements such as nitrogen entering a workspace.
The Ax60+ also helps monitor for oxygen enrichment that can occur in workplaces that use pure O2, such as medical laboratories, fire suppression units and facilities using liquid nitrogen.
Oxygen enrichment happens when the content of the air in a building or room becomes greater than the normal 21 percent. When this occurs, there is a higher potential for fires as items that might not normally be considered flammable can catch fire.
-
Ax60+ Legislation
Analox engineers and product designers developed the Ax60+ to meet the diverse safety needs and regulatory requirements mandated by local, state and federal authorities. In the United States, the Ax60+ has been pre-programmed to meet USA regulations with system alarm setpoints for OSHA, NBIC, NFPA and IFC standards. In Europe, the Ax60+ setpoints utilize the EH40 standard. The Ax60+ is also certified by UL.
Technical Specification
CENTRAL DISPLAY UNIT
| Warm-up time | 40 seconds |
| Operating temperature range | 5°C to +50°C +23°F to +122°F |
| Warranty | 5 Years Electronics |
| Display | LCD dot matrix (backlit) |
| Relays | 2 x high powered configurable relays rated for 250V AC/ 30V DC, 3A max |
| Maximum power consumption | <24 W |
| Power supply accepts inputs from | 100-240V ~ 1.5A through the transformer or 24VDC direct power |
| IP rating | IP54 |
| Dimensions | w 6.9” / 175mm h 4” / 106mm d 2.6” / 67mm |
| Optional Extras | 24V supply available for optional external beacon |
SENSOR UNITS
| CO2 Sensor Unit | O2 Sensor Unit | |
|---|---|---|
| Gas Detected | Carbon Dioxide (CO2) | Oxygen (O2) |
| Measurement Technique | Infrared | Electrochemical cell |
| Range | 0% to 5% (0-50,000ppm) | 0% to 25% |
| Default alarm set-points | USA regulations (OSHA, HBIC, NFPA and IFC): TWA - 5000ppm (0.5%) AL1 - 15000ppm (1.5%) CO2 - 30000ppm (3%) International/European regulations (EH40): TWA - 5000ppm (0.5%) AL1 - 5000ppm (0.5%) AL2 - 15000ppm (1.5%) AL3 - 30000ppm (3%) |
18% (low) 19.5% (low) 23% (high) |
| Sensor warm up time | 40 Seconds | |
| Warranty | 5 Years | 5 Years graded |
| Response time | Carbon Dioxide (CO2) | Ax60+ |
| Ax60+ | IP55 | IP55 |
| Dimensions | w 3” / 72mm h 5.1” / 132mm d 2” / 52mm |
w 3” / 72mm h 5.1” / 132mm d 2” / 52mm |
ALARM UNIT
| Strobe | White LED strobe > 100 cd (optional blue, red & amber filters) |
| Sounder | Min 80 dBA @3m / (9.8 feet) |
| Warranty | 5 Years Electronics |
| Dimensions | w 3” / 72mm h 5.1” / 132mm d 2” / 52mm |